Customers compare AKIHUB-545-2-LFEZ-2K to these similar products
Products Featured in this Video
Hi there, trailer owners. Today we're going to be taking a look and showing you how to replace etrailer's line of idler hubs.This is what a typical idler hub looks like when it's installed. One of the things you'll notice about the idler hub is that there's no braking components on it. That's why it's called an idler. This is just a place for you to install your wheel onto, so that way when you're… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…
view full answer...I looked up the information on your TDE 46205 Hubs and found a couple of great replacements for you. The one you pick will depend on the number of wheel studs you have. For 5 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z…
view full answer...The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643…
view full answer...Hey Les, thanks for the info you mentioned from your old hub. Based on that the part #AKIHUB-545-2-G-EZ-2K would work great as a replacement. This is also galvanized which means it will do a great job fighting corrosion as well.
view full answer...With the info you listed I was able to determine that you have a 5 lug 2,000 lb capacity hub no so for a replacement you would want the #AKIHUB-545-2-G-EZ-2K that you referernced. This comes with bearings and an ez lube cap as well.
view full answer...The psi of your trailer tires will be listed on the side wall. It will list the max psi which is what you will want to fill them to regardless of how much weight you have. For reference, the 4.80 x 12 tires we carry have a 60 psi max for load range B…
view full answer...The torque specifications for the Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel part #AM30670 will be between 75-85 ft. lbs. If you need a torque wrench, we have plenty to choose from such as the 1/2" Drive Torque Wrench part…
view full answer...Based on the information and pictures you provided (thank you!) either the etrailer.com 2K Trailer Idler Hub Assembly #AKIHUB-545-2-EZ-2K or the Galvanized #AKIHUB-545-2-G-EZ-2K you referenced would work great as replacements, the only physical…
view full answer...The 125255UC seal has a 1.249" ID and a 1.983" OD and for that our part #34823 will be the correct replacement.
view full answer...Really it's going to boil down to which spindle type your Bayliner Capri has. The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles #AKIHUB-545-35-G-EZ-K will work with 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84…
view full answer...If you look at the outermost part of the spindle on your axle there will be what is called a grease zerk or grease gun fitting. It will look like a tiny round ball which is where you can attach a grease gun to grease your spindle. If your spindle has…
view full answer...I have a solution for you. You would actually want the part #AKIHUB-440-2-2K as it has a 4 on 4 inch bolt pattern like you need and the bearings that come with the hub are designed to fit a hub with 1-1/16 inner diameter bearings.
view full answer...