Customers compare AR74FR to these similar products
Products Featured in this Video
Hey everybody, Ryan here from etrailer. Today, we are on the Mighty Missouri River and we're gonna be checking out the Ark self-aligning boat trailer guides. Now, when it comes to this type of thing, the first thing I wonder is, is it gonna work with my particular application and do what it is intended to do So today, we will find out just that. So the whole point of these is to help get your… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The CE Smith Keel Roller for Boat Trailers #CE29505 is our only self centering keel roller. It is 12" wide versus the 8" that you are looking for. We do have the CE Smith Panel Bracket for 12" Boat Trailer Rollers #CE10305G…
view full answer...The Dutton-Lainson Roller Bunk Bracket, part #DL21742, fits Dutton-Lainson Roller Bunks #DL21740 and DL21741. Four are needed to mount a pair of roller bunks. My contact at Dutton-Lainson advises that u-bolts are not specifically required to…
view full answer...I reached out to the manufacturer, Ark, and there is not a weight capacity for the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System #AR84FR. Instead, they said it was simply rated for boats that range from 20' to 28' long. As…
view full answer...I have a few options to help with loading the boat on the trailer but the best would have to be the CE Smith Keel Roller for Boat Trailers part #CE29505. In order to mount them you'd need the Roller Shaft with Pal Nuts part #CE10727A and CE…
view full answer...I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing #L68149, outer bearing #L44649, and the grease seal #58846. All of these can be found in the kit #BK2-100 if you are needing to…
view full answer...The Boat Trailer Roller Bunk Brackets #DL21742 do require 7/16" U-bolts such as #7163183UB. The bunk brackets are designed to be used with Roller Bunks #DL21740 or #DL21741.
view full answer...You can use roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 instead of carpeted bunks on your 2012 Deep V Tracker boat without any marks or indentations. The roller bunks…
view full answer...The bunks should be what's bearing the weight of the boat on the trailer and the rollers like the #CE32015G are designed to make enough contact that they guide the boat on the trailer but not fully support the boats weight. Think of them as…
view full answer...The eZ-Latch on the Demco Channel Tongue Trailer Coupler #DM13689-52 does make it easier to connect the trailer and ensure the coupler latches down fully than your trigger style coupler. Since you can visibly see the latch raise and drop you know you…
view full answer...I do have a photo of the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System part #AR84FR installed which you can see below. This should give you a better idea of what is involved but it's not complicated at all. These work really well and…
view full answer...I went out to the warehouse and pulled a roller bunk bracket #DL21742 to measure the slotted hole spacing for you. The slotted holes are 1-1/4 inches apart on center. I also made a short video showing this measurement for you.
view full answer...We've had similar questions in the past that used the number you referenced and we were able to determine that the taillight kit replacement was the part #TLL160RK.
view full answer...