Customers compare e22YR to these similar products
Products Featured in this Video
Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at this 4-Leaf Double-Eye Spring for 4,000 pound trailer axles. This double-eye leaf spring acts as part of your trailer's suspension system by providing an attachment point for a 4,000 pound axle. It is made from a sturdy steel construction and it's designed to flex to absorb road shock and provide a smooth ride,… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The slight gap you see is normal. The drum is not supposed to make contact with the brake mounting plate. There are some instances when mixing brands of brakes, hubs, and axles, that won't line up properly but in this case it is normal. I…
view full answer...Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is…
view full answer...Both your axles will use the same Grease Seal #58846. I am going to list all the common replacement parts for each axle so that you have that information. 4,400lb Axle Inner Bearing #L68149 Outer Bearing #LM67048 Inner Race #L68111 Outer Race…
view full answer...The standard amount of space that we recommend having between the top of your tires and the fender is 4" with your trailer unloaded. If this is shorter for your 2006 enclosed trailer then it is definitely wise to switch something up. The only…
view full answer...Replacement trailer leaf spring info isn't listed anywhere on the trailer but it's not too hard to figure out what you would need. Basically you need to know the axle capacity of the trailer and the length of the current springs. Since we…
view full answer...I definitely recommend replacing your 3,500 lb 26 inch leaf springs with the 26 inch 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR. The 4,500 lb would be too stiff and your ride would suffer so the better option by far are the 4k…
view full answer...The 26" Long 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR will work great as a replacement for your Dexter Axle Leaf Spring 072-022-00. This is rated for a slightly higher weight rating but it isn't too much higher so you…
view full answer...A 4,000 lb rated axle leaf spring like the part #e22YR would be a great option for your 2021 Keystone 26RB travel trailer. It would give you a little more capacity to help with the additional support you need on the one side of the trailer. It would…
view full answer...Yes, the Grease Seals 10-36 part #RG06-070 are a direct replacement for the Dexter 010-036-00.
view full answer...The Moryde wet bolts #MR52HR use a standard 1/4"-28 thread for the zerk fittings.
view full answer...In the attached diagram the A measurement is actually the distance from the center of the spring hangers for a single axle trailer. The spring eye to spring eye measurement for your leaf springs will be slightly different. The B measurement that you…
view full answer...You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
view full answer...